Brake/Clutch Fluid Reservoir Fitting Kit

Description

• DELIVERY

Brake/Clutch Fluid Reservoir Fitting Kit – 7/16″ Remote Reservoir Kit

Suitable for connecting your brake fluid reservoir with a 7/16″ outlet to your brake master cylinder with a 7/16″ intlet. Kit Contains:

• 1x 7/16″ UNF Straight Female Fitting + Back Nut & Olive
• 1x 7/16″ Stainless Steel Banjo Fitting + Back Nut & Olive
• 1x 7/16″ UNF Stainless Steel Banjo Bolt + Copper Crush Washers
• 1m Stainless Steel Brake Hose

WARNING

IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING A BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THAT COMPONENT OR KIT FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE UNSURE, SEEK EXPERT PROFESSIONAL QUALIFIED HELP OR RETURN THIS ITEM TO US. YOU, OR THE PERSON WHO INSTALLS THIS PRODUCT, MUST KNOW HOW TO INSTALL OR PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE TO OFFER TECHNICAL ASSISTANCE OVER THE PHONE TO UNDERSTAND OR FORESEE ALL THE ISSUES THAT MIGHT ARISE IN YOUR SPECIFIC INSTALLATION. RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR DAMAGE, WEAR OR FATIGUE.

DELIVERY Brake/Clutch Master Cylinder – Bore 0.625″ (16 mm) Brake/Clutch Master Cylinder – Bore 0.70″ (18 mm) Brake/Clutch Master Cylinder – Bore 0.75″ (19 mm)